Avaya Communication Manager Administrator's Manual page 429

5. In the Trunk Type field, type ground start.
This field tells the system what kind of signaling to use on this trunk group. To prevent glare,
Avaya recommends ground start signaling for most two-way CO, FX, and WATS trunk
groups.
6. In the Trunk Port field, type 01D1901.
This is the port to which the trunk is connected.
7. In the Trunk Termination field, type rc.
Use rc in this field when the distance to the central office or the media server at the other
end of the trunk is more than 3,000 feet. Check with your service provider if you're not sure
of the distance to your central office.
8. In the Outgoing Dial Type field, type tone.
This field tells Communication Manager how digits are to be transmitted for outgoing calls.
Entering tone actually allows the trunk group to support both DTMF and rotary signals, so
Avaya recommends that you always put tone in this field.
9. Press Enter to save your changes.
You assign phones to a PCOL group by administering a CO Line button on each telephone.
Once assigned, the Assigned Members page of the Personal CO Line Group screen displays
member phones:
Figure 179: Personal CO Line Group screen
ASSIGNED MEMBERS (Stations with a button for this PCOL Group)
Ext
1:
2:
3:
4:
5:
6:
7:
8:
PERSONAL CO LINE GROUP
Name
Adding a PCOL Trunk Group
Page 2 of X
Ext Name
9:
10:
11:
12:
13:
14:
15:
16:
Issue 1 June 2005 429