Avaya Communication Manager Administrator's Manual page 217

6. Press Enter to save your changes.
The system is in Night Service.
Any calls to extension 2000 now go to extension 3000 (the guard's desk).
Any "0" seeking calls go to extension 3000 (the guard's desk).
To send LDN calls to the attendant during the day and to the TAAS bell at night:
1. Type change console-parameters and press Enter.
The Console Parameters
Figure 83: Console Parameters screen
Attendant Group Name: Operator
Calls in Queue Warning: 5
Ext Alert Port (TAAS): 01A0702
SAC Notification? n
IAS Att. Access Code:
Attendant Vectoring VDN:
2. In the DID-LDN Only to Night Ext. field, type y.
This allows only listed directory number calls (LDN) to go to the listed directory night service
number extension.
3. In the Ext Alert Port (TAAS) field, type 01A070.
This is the port address assigned to the external alerting device.
4. Press Enter to save your changes.
The system is in night service.
Any DNIS extension 2000 calls now go to the TAAS bell.
Any "0" seeking calls now go to the TAAS bell.
screen appears.
CONSOLE PARAMETERS
COS: 0
CAS: none
IAS (Branch)? n
Backup Alerting? n
Attendant Lockout? y
Night Service Act. Ext.:
IAS Tie Trunk Group No.:
Alternate FRL Station:
DID-LDN Only to LDN Night Ext? y
Issue 1 June 2005
Setting up Night Service
COR: 0
217