Avaya Communication Manager Administrator's Manual page 544

Managing Data Calls
Considerations
For wideband switching with non-ISDN-PRI equipment, you can use an ISDN-PRI terminal
●
adapter.
Interactions
Administered Connections
●
Provides call initiation for WAEs. All Administered Connections that originate from WAEs
use the entire bandwidth administered for WAE. The destination of an Administered
Connection can be a PRI endpoint.
Automatic Circuit Assurance
●
Treats wideband calls as logical single-trunk calls so that a single ACA-referral call is made
if an ACA-referral call is required. The call is referred to the lowest B-channel associated
with the wideband call.
Call Coverage
●
A wideband endpoint extension cannot be administered as a coverage point in a
call-coverage path.
Call Detail Recording
●
When CDR is active for the trunk group, all wideband calls generate CDR records. The
feature flag indicates a data call and CDR records contain bandwidth and BCC.
Call Forwarding
●
You must block Call Forwarding through Class of Service.
Call Management System and Basic Call Management System
●
Wideband calls can be carried over trunks that are measured by CMS and BCMS.
Wideband endpoints are not measured by CMS and BCMS.
Call Vectoring
●
PRI endpoints can use a vector-directory number (VDN) when dialing. For example, PRI
endpoint 1001 dials VDN 500. VDN 500 points to Vector 1. Vector 1 can point to other PRI
endpoints such as route-to 1002, or route-to 1003, or busy.
Call Vectoring is used by certain applications. When an incoming wideband call hunts for an
available wideband endpoint, the call can route to a VDN, that sends the call to the first
available PRI endpoint.
544 Administrator Guide for Avaya Communication Manager