Group Number - This field displays the MASI trunk group number. This is the number
●
assigned when executing the add masi trunk-group command.
CDR Reports - Valid entries are y, n, and r. Default is y.
●
- If you enter y, Call Detail Recording (CDR) records will be generated by completed
outgoing calls terminated on this trunk group. If incoming calls are being recorded (the
Record Outgoing Calls Only field on the CDR System Parameters screen is set to n),
then a single CDR record will be generated for answered calls with the call duration.
- If you enter n, no CDR records will be generated by calls originated by or terminated on
this trunk group.
Group Name - Enter a unique name that identifies the trunk group. Up to 27 characters
●
can be used; default is "INCOMING CALL."
COR - Enter a Class of Restriction (COR) number (0 to 95) that reflects the desired
●
restriction; default is "1."
TN - This field displays the Tenant Partition number. All MASI trunks are associated with
●
Tenant 1.
TAC - Enter the trunk access code (TAC) that identifies the trunk group on CDR reports.
●
You must assign a different TAC to each MMCX interface. Valid entries conform to the dial
plan (1 to 4 digits, * and # are valid first digits).
MASI Node Number — The node number assigned to this MMCX machine.
●
Remote Group Number — This is the number of the remote trunk group. For ISDN-PRI
●
interfaces, valid values are any number 1 to 8; for local area network (LAN) or WAN calling
interfaces, the value must be 9. The combination of MASI Node Number and Remote
Group Number must be unique. Remote group number corresponds to the group number
on the MASI node.
How to view a list of all MASI trunk groups
To view a list of all the MASI trunks administered on the ECS, use the command list masi
trunk-group.
Figure 135: List masi trunk-group output
Group
Number
TAC
xxx
xxxx
MASI TRUNK GROUP
Group Name
xxxxxxxxxxxxxxxxxxxxxxxxxxx
Multimedia Applications Server Interface
Node
Remote
Number
Grp No.
CDR
xx
x
x
Issue 1 June 2005
COR
TN
xx
xxx
299