If you do not intend to use Remote Access now or in the future, you can permanently disable
the feature. If you do decide to permanently disable the feature, it will require Avaya Services
intervention to activate the feature again.
Before you start
Configure the Incoming Destination and Night Service fields on the CO Trunk screen. For
information about configuring a CO trunk, see
page 422.
Verify that the Authorization Codes field on the System Parameters Customer Options
screen is set to y.
Verify that the SVN Authorization Code Violation Notification Enabled field on the
Security-Related System Parameters screen is set to y.
Instructions
Setting up remote access
In our example, we set up a remote access extension with maximum security. This assists you
in blocking unauthorized people from gaining access to your network.
To set up remote access:
1. Type change remote-access and press Enter.
The
Remote Access
Adding a CO, FX, or WATS Trunk Group
screen appears.
Setting up Remote Access
on
Issue 1 June 2005
377