Avaya Communication Manager Administrator's Manual page 891

!
WARNING:
The AT&T Switched Network Protocol does not support restricted displays of
WARNING:
connected numbers. Therefore, if you administer the 1a country-protocol/
protocol-version combination on the DS1 screen, you cannot set the Send
Connected Number field to r (restricted) on the ISDN-PRI Trunk Group screen,
as this causes display problems.
Public network signaling administration for ISDN-PRI Layer 3
The table below shows Avaya Communication Manager public-network access connections for
ISDN-PRI Layer 3.
Admin Country
value
1-a United
States,
Canada
1-b United
States
1-c United
States
1-d United
States
2-a Australia
2-b Australia
3 Japan
4 Italy
5 Netherlands
6 Singapore
7 Mexico
8 Belgium
9 Saudi Arabia
10-a United
Kingdom
Protocol supported
AT&T TR 41449/ 41459 (tested with
AT&T network, Canadian network, and
MCI network)
Bellcore TR 1268;
NIUF.302; ANSI T1.607
NORTEL DMS-250 BCS36/IEC01
Telecordia SR-4287
AUSTEL TS014.1;
Telecom Australia TPH 1856 National
ISDN protocol
ETSI ISDN protocol
NTT INS-NET
ETS 300 102
ETS 300 102
ETS 300 102
ETS 300 102
ETS 300 102
ETS 300 102
ETS 300 102 (for connection to DASS
II/DPNSS through external converter)
DS1 Circuit Pack
B-channel
mtce msg
Service
Restart
Service
Service
Restart
Restart
Restart
Restart
Restart
Restart
Restart
Restart
Restart
Restart
1 of 2
Issue 1 June 2005 891