Avaya Communication Manager Administrator's Manual page 296

Managing MultiMedia Calling
Dest. Digits - A valid MMCX extension. This must correspond to the value of the tscnum
●
argument to the chgmasi command.
Note:
These digits are sent as entered to the destination MMCX; no routing or other
Note:
digit manipulation is performed.
Appl. - Specifies the application this administered NCA-TSC is going to be used for. Enter
●
masi.
Machine ID - Used to indicate the MASI node to which this administered NCA-TSC is
●
connected. This number should be the same as the MASI node number found on other
screens.
How to list TSCs or determine status of the TSC
To determine which TSCs are designated for MASI, use the list masi tsc command.
Figure 132: MASI Temporary Signaling Connections (TSC) Display
Sig. Primary
Grp D-Chan
xxx xxxxxxx
xxx xxxxxxx
xxx xxxxxxx
This command displays the following:
Sig Grp — The number of the signaling group to which this TSC belongs
●
Primary D-Channel — Port location of the Primary D-channel
●
TSC Index — The number of the MASI TSC within the signaling group
●
Local Ext. — Avaya Communication Manager extension associated with the TSC
●
Enabled — Indicates the state of the connection - enabled (y/n)
●
Established — Value of established flag (as-needed/permanent)
●
Dest. Digits — The MMCX extension that indicates the TSC destination
●
Mach. ID — MASI node number
●
Once you establish and enable the signaling group, you need to verify that it is active. Use the
command status signaling-group signaling-group# or status
tsc-administered signaling-group# [/tsc-index] [print] to determine if the
link is active.
296 Administrator Guide for Avaya Communication Manager
MASI TEMPORARY SIGNALING CONNECTIONS (TSC)
TSC Local
Index Ext. Enabled
xxx xxxxx x
xxx xxxxx x
xxx xxxxx x
Established Dest. Digits
xxxxxxxx xxxxxxxxxxxxxxx
xxxxxxxx xxxxxxxxxxxxxxx
xxxxxxxx xxxxxxxxxxxxxxx
Mach.
ID
xx
xx
xx