Avaya Communication Manager Administrator's Manual page 81

Physically connecting the telephone
Once you have collected all the information, you are ready to physically wire the port to the
cross-connect field.
If you have an Avaya technical support representative or on-site technician who completes the
physical connections, you need to notify them that you are ready to add the telephone to the
system. To request that Avaya install the new connections, call your Avaya technical support
representative to place an order.
If you are responsible for making the connections yourself and if you have any questions about
connecting the port to the cross-connect field, see your system installation guide.
Now you are ready to configure the system so that it recognizes the new telephone.
Before you start
To download language display labels for phones, set the Display Language field on the
Station screen to english, spanish, italian, french, user-defined, or unicode.
Note:
Unicode display is only available for Unicode-supported telephones. Currently,
Note:
only the 4620SW and 4610SW support Unicode display.
For a Eurofont character display for the 2420/2410 telephone, set the Display Character Set
field on the System-Parameters Country-Options screen to Eurofont.
For a Katakana character display for the 2420/2410 telephone, set the Display Character Set
field on the System-Parameters Country-Options screen to Katakana.
Completing the station screens
The information that you enter on the station screen advises the system that the telephone
exists and indicates which features you want to enable on the telephone.
To access the Station
1. Type add station nnnn, where nnnn is the extension for the new telephone. Press
Enter.
Make sure the extension conforms to your dial plan. You can also use the add station
next command to add a telephone to the next available extension.
screen for the new telephone:
Adding New Telephones
Issue 1 June 2005 81