Avaya Communication Manager Administrator's Manual page 731

Valid entries Usage
vis Visually Impaired Attendant Service (vis)
visually impaired service for the attendant. When this service is
activated, the attendant can listen to console status or messages by
pressing buttons that have been translated as follows:
—
Trunk Group Select
Button Assignments on Field descriptions for page 1, up to 12 single lamp DTGS
buttons can be administered on this page. The status lamp associated with the feature
button is used to monitor the busy/idle status of the trunk. Trunk groups administered on
these buttons cannot be controlled using Attendant Control of Trunk Group Select
buttons. The single lamp DTGS buttons can be administered as follows:
local-tgs Local trunk group select; allows the attendant to access trunk
groups on the local server running Avaya Communication Manager
(combination of 12 local-tgs/remote-tgs per console).
remote-tgs Remote trunk group select; allows the attendant to access trunk
groups on a remote server running Avaya Communication Manager
(combination of 12 local-tgs/remote-tgs per console).
hundrd-sel Hundreds group select; in addition to the fixed HGS buttons on Field
descriptions for page 1, a user can administer hundreds group
select feature buttons on this page. When a feature button is
administered as "hundrd-sel," a subfield appears that must then be
administered in the same manner as the fixed HGS button fields (a
1 to 3 digit hundreds group plus prefix, if needed). Administered
"hundrd-sel" feature buttons operate in the same manner as fixed
HGS buttons.
The total number of hundreds group select buttons (fixed and
administered) allowed on a console is 20. Thus, if all 20 fixed HGS
buttons have been administered, no "hundrd-sel" feature buttons
can be administered.
Note: If no fixed HGS buttons are administered, 19 "hundrd-sel"
feature buttons are available. This is because 5 of the 24 feature
buttons must be used for required feature buttons (hold, pos-busy,
night-serv, forced-rel, and split)
group-disp Group Display. Allows the attendant to see a display of extensions
currently being tracked on the DXS module.
group-sel Group Select. Allows the attendant to select a specific group of
hundreds by dialing the first 2 or 3 digits of the hundreds group.
"con-stat" repeats the console status.
●
"display" calls out display contents.
●
"dtgs-stat" calls out the DTGS status.
●
"last-mess" repeats the last message.
●
"last-op" calls out the last operation.
●
In addition to the 12 Direct Trunk Group Selection (DTGS)
Attendant Console
—
This button activates
3 of 4
Issue 1 June 2005 731