Attendant Vectoring - Avaya Communication Manager Administrator's Manual

Screen Reference
Valid entries
reply-best
route-to
stop
wait-time
ANI/II-Digits
A display-only field indicating whether you can use ANI and II-Digits Vector Routing
Commands. ANI/II-Digits Routing requires that the G3V4 Enhanced field be y.
ASAI Routing
A display-only field indicating whether, on the
the CallVisor Adjunct/Switch Applications Interface (ASAI Link Core Capabilities) field is
y.

Attendant Vectoring

This field appears only if, on the
Attendant Vectoring field is y. Attendant Vectoring and Meet-me Conference cannot be
enabled at the same time. This field does not appear for S8700 Series IP-Connect.
Valid entries
y
n
746 Administrator Guide for Avaya Communication Manager
Usage
Used only in status poll vectors in multi-site Best
Service Routing applications, where it "returns" best
data for its location to the primary vector on the origin
server.
Routes calls either to a destination that is specified by
digits collected from the caller or an adjunct (route-to
digits), or routes calls to the destination specified by
the administered digit string (route-to number).
Halts the processing of any subsequent vector steps.
Delays the processing of the next vector step if a
specified delay time is included in the command's
syntax. Also provides feedback (in the form of
silence, ringback, or music) to the caller while the call
advances in queue.
System-Parameters Customer-Options
System-Parameters Customer-Options
Usage
Enter y so the vector is an attendant vector. Default when, on the
System-Parameters Customer-Options
(Basic) and Vectoring (Prompting) fields are y.
Default when, on the System-Parameters Customer-Options
screen, the Vectoring (Basic) and Vectoring (Prompting) fields
are n. No changes allowed to this field.
2 of 2
screen,
screen, the
screen, the Vectoring