Avaya Communication Manager Administrator's Manual page 322

Managing MultiMedia Calling
Feature Access Codes
●
- Basic Mode Activation (p.5)
- Enhanced Mode Activation (p.5)
- Multimedia Call Access Code (p.5)
- Multimedia Data Conference Activation & Deactivation (p.5)
The Multimedia Data Conference Deactivation FAC must be entered after you are active on
a multimedia call. To enter the FAC:
1. Select Transfer.
2. Receive a dialtone.
3. Dial the FAC.
4. Receive a confirmation tone.
5. Re-select the call appearance for the held multimedia call.
- Multimedia Multi-Address Access Code (p.5).
- Multimedia Parameter Access Code (p.5).
DS1 Circuit Pack (ESM Only)
●
- Bit Rate=2.048.
- Line Coding=hdb3.
- Signaling Mode=isdn-pri.
- Connect=pbx.
- Interface=network.
- Country Protocol=1.
- CRC=y.
- MMI Cabling Board.
Signaling group (ESM Only)
●
- Primary D-Channel.
322 Administrator Guide for Avaya Communication Manager