Avaya Communication Manager Administrator's Manual page 101

Figure 29: Station screen
add station 3001
Extension: 3001
Type: 6408D
Port: X
Name:
STATION OPTIONS
Data Module? n
Speakerphone: 2-way
Display Language: english
Note that you choose to change an existing DCP extension by using change station
nnnn in this step, where nnnn is the existing DCP extension.
2. In the Type field, enter the model of telephone you want to use, such as 6408D.
3. In the Port field, type x for virtual telephone or enter the port number if there is hardware.
Note:
Port 1720 is turned off by default to minimize denial of service situations. This
Note:
applies to all IP softphones release 5.2 or later. You can change this setting, if
you have root privileges on the system, by typing the command: /opt/ecs/
sbin ACL 1720 on or off.
4. In the Security Code field, enter the password for this remote user, such as 1234321.
This password can be 3-8 digits in length.
5. In the Media Complex Ext field, type 3000.
This is the H.323 extension just administered.
6. In the IP Softphone field, type y.
7. On page 2, in the Service Link Mode field, type as-needed.
Set this field to permanent only for extremely busy remote telephone users, such as call
center agents.
8. In the Multimedia Mode field, type enhanced.
9. Press Enter to save your work.
Now you can install and configure the software on the user's PC. In this example, the user will
login by entering their DCP extension (3001) and password (1234321).
STATION
Loss Group: 2
Lock Messages? n
Security Code: *
Coverage Path 1:
Coverage Path 2:
Hunt-to Station:
Personalized Ringing Pattern: 1
Message Lamp Ext: 3000
Mute Button Enabled? y
Media Complex Ext: 3000
Adding an IP Softphone
Page 1 of x
BCC: 0
TN: 1
COR: 1
COS: 1
IP Softphone? y
Issue 1 June 2005 101