Avaya Communication Manager Administrator's Manual page 565

4. Click the Dial button. When the media server's modem answers, the system displays the
After Dial Terminal screen.
5. Log on to the LAN.
a. Enter your remote access login name and password.
b. When the Start PPP Now! message appears, click Done.
c. The system displays a small double-computer icon in the lower right portion of your
screen.
6. Double-click the double-computer icon.
7. The system displays the connection's Dialup Status box.
8. Click on the Details tab.
9. Note the Server IP address.
10. Open a telnet session to the Media Server:
Type telnet <ip-address>, where <ip-address> is the Server IP address as noted
in the Dialup Status box from Step 9.
11. Access SAT or use the CLI commands as needed.
International Modem Settings
You can change modem settings for a specific country using the Linux command line. To enter
AT commands from a Linux command prompt:
1. On the command line, type (without quotes): cu -l /dev/ttys1, where -l is a lowercase L.
Replace "ttyS1" with the tty port for the USB (e.g., /dev/usb/ttyACM0 for USB port 1). Press
Enter.
The system displays a "Connected" message.
2. Type ATI. Press Enter.
The system displays an OK message.
3. Type the appropriate AT command to change the modem setting for the desired country.
For example, for Japan, type AT%T19,0,10&W0. Press Enter.
The system displays an OK message.
4. To return to the command prompt, type "~" (without quotes).
Administering Call-processing
Issue 1 June 2005 565