Avaya Communication Manager Administrator's Manual page 574

Administering Media Servers
Administering log-in permissions for SNMP
To set up a Communication Manager SNMP agent (CMSA), you first need the ability to display
administration commands and get system measurements.
Instructions
1. On the SAT, type change permissions acpsnmp and press Enter.
The Command Permissions Categories screen displays.
Figure 208: Command Permission Categories screen
change permissions acpsnmp
COMMON COMMANDS
ADMINISTRATION COMMANDS
Additional Restrictions? n
MAINTENANCE COMMANDS
2. In the Display Admin. and Maint. Data field, type y.
3. In the System Measurements field, type y.
Note:
To be able to do busy out and release commands, do steps 4-9, if applicable
Note:
(based on your customer options):
4. In the Maintain Stations field, type y.
5. In the Maintain Trunks field, type y.
6. In the Maintain System field, type y.
574 Administrator Guide for Avaya Communication Manager
COMMAND PERMISSION CATEGORIES
Login Name: acpsnmp
Display Admin. and Maint. Data? y
System Measurements? y
System Mgmt Data Transfer Only? n
Administer Stations? n
Administer Trunks? n
Maintain Stations? n
Maintain Trunks? n
Maintain System? n
Administer Features? n
Administer Permissions? n
Maintain Switch Circuit Packs? n
Maintain Process Circuit Packs? n
Maintain Enhanced DS1: n
Page 1 of x