Avaya Communication Manager Administrator's Manual page 215

Figure 80: Console Parameters screen
change console-parameters
Calls in Queue Warning: 5
Attendant Vectoring VDN:
2. In the EXT Alert Port (TAAS) field, type 01A0702.
Use the port address assigned to the external alerting device.
3. Press Enter to save your changes.
Setting up external alerting night service
Calls redirected to the attendant via Call Forwarding or Call Coverage will not go to the LDN
Night Station. If there is no night station specified, and the TAAS bell is being used, these calls
ring the TAAS bell. A call following the coverage path rings the TAAS bell for the number of
times indicated in the Coverage Don't Answer Interval for Subsequent Redirection (Rings) field.
If not answered, the call proceeds to the next point in the station's coverage path. If the call was
sent to the Attendant by Call Forwarding, it continues to ring the TAAS bell.
When night service is enabled, and there is a night service destination on the LDN screen, calls
covering to the attendant attempt to ring the night destination instead of the attendant position
even if the handset is plugged in.
Instructions
To send LDN calls to the attendant during the day and to a guard's desk at night:
1. Type change listed-directory-numbers and press Enter.
The Listed Directory Numbers
Attendant Group Name: OPERATOR
COS: 0
Ext Alert Port (TAAS): 01A0702
CAS: none
IAS (Branch)? n
IAS Att. Access Code:
Backup Alerting? n
CONSOLE PARAMETERS
Night Service Act. Ext.:
IAS Tie Trunk Group No.:
DID-LDN Only to LDN Night Ext? n
screen appears.
Setting up Night Service
Page
COR: 0
Attendant Lockout? y
Alternate FRL Station:
Issue 1 June 2005
1 of x
215