Avaya Communication Manager Administrator's Manual page 710

Screen Reference
QLen (Queue Length)
The queue length is the number of calls that can queue for this announcement. The maximum
number of queues allowed depends on your system configuration.
The QLen field applies if the Q field is y and the Type field is analog, ds1 or aux-trunk. When
the Type field is integrated or integ-rep, N/A appears in this field. Integrated announcements
have a pre-set queue length
.
Valid entries
The maximum number
your system allows
Rt
Enter the recording rate speed (in 1000 bits/second) for integrated announcements. A different
recording speed may be used for each integrated announcement. When the Type field is
analog, ds1 or aux-trunk, N/A appears in this field.
TN750 or ISSPA.
Valid entries
16
32
64
TN
Valid entries
1 to 100
710 Administrator Guide for Avaya Communication Manager
Usage
Number of calls that can be queued for this
announcement
Usage
16 kbps (8 minutes and 32 seconds of announcement
time per circuit pack or 1 hour and 24 minutes for 10
circuit packs for the TN750; for the ISSPA, there are 240
minutes of storage time). This rate does not provide a
high-quality recording. Avaya does not recommend this
for customer announcements, but it is adequate for VDN
of Origin announcements.
32 kbps (4 minutes and 16 seconds of total
announcement time for the TN750; for the ISSPA, there
are 120 minutes of storage time).
64 kbps (for 2 minutes and 8 seconds of announcement
time per circuit pack or 42 minutes for 10 circuit packs for
the TN750; for the ISSPA, there are 60 minutes of storage
time). This is the default for VAL.
Usage
Enter the Tenant Partition number, if any.