Avaya Communication Manager Administrator's Manual page 885

Idle Code
!
CAUTION:
Customers: The entry in the Country Protocol field sets the default idle code. Do
CAUTION:
not change the default without assistance from Avaya or your network services
provider.
For some circuit packs, this is a display-only field.
Valid entries
any 8-digit string
of 0's and 1's
Interconnect
For E-1 service using channel-associated signaling, the entry in this field tells Avaya
Communication Manager whether the DS1 circuit pack is using a public or private network
protocol. The entry in this field must agree with the entry in the Group Type field on the Trunk
Group screen. This field appears only when the Signaling Mode field is CAS.
Valid entries
pbx
CO
Usage
This entry sets the signal sent out over idle DS0
channels. The string must be compatible with the
protocol used by the far-end switch/server.
Usage
If pbx is selected, the board operates as a tie trunk
circuit pack.
If CO is selected, the board operates as a CO or DID
circuit pack.
DS1 Circuit Pack
Issue 1 June 2005 885