Avaya Communication Manager Administrator's Manual page 578

Administering Media Servers
Administering SNMP agents
This link provides support for administration of the co-resident SNMP master agent and
Communication Manager SNMP agent (CMSA).
Enable and disable access to the CMSA
●
Enable and disable each protocol (V1, V2, V3) individually. Any combination may be
●
enabled.
Administration of the password for the ACPSNMP login
●
Enable SNMP busyout/release of Communication Manager objects and setting QOS
●
parameters
You can use this page to allow or restrict SNMP services at the application level. (You can use
the Firewall page — Advance Settings to inhibit the reception of SNMP messages at the
network level (see
Both must be enabled for SNMP to function.)
This screen is divided into three sections:
1. Communication Manager SNMP Agent
Shows if the CMSA is enabled (the checkbox is checked).
●
Shows if the CMSA can be used to busyout and release boards, ports, trunk groups, and
●
trunk members or to set QOS parameters (checkbox is checked).
2. SNMP Users / Communities
Shows the status of SNMP version 1 read-only and read-write communities. If a
●
community has been administered, it displays.
Shows the status of SNMP version 2c read-only and read-write communities. If a
●
community has been administered, it displays.
Shows the status of SNMP version 3 read-only and read-write users. If a user has been
●
administered, its information displays. Passwords do not display; stars display to show a
password has been administered. If a privacy password is used, an authentication
password also must be given.
3. IP Addresses for SNMP Access
A list of IP addresses from which SNMP access is allowed, or
●
All IP addresses.
●
Each SNMP version can be enabled and disabled independently of the other versions.
578 Administrator Guide for Avaya Communication Manager
Turning on access for the SNMP ports at the network level on page 582).