Managing VAL Announcements Using FTP
This section includes information on setting up and terminating a file transfer protocol (FTP)
session and outlines tasks that you can do in an FTP session.
There are 3 basic components to an FTP session:
Setting up an FTP session
●
Performing tasks in an FTP session
●
Ending an FTP session
●
!
SECURITY ALERT:
Be sure to read and observe all of the Security Alerts regarding enabling and
SECURITY ALERT:
disabling the VAL (TN2501AP or embedded G700 Gateway circuit packs)
filesystem and FTP sessions into it.
Setting up an FTP session
Setting up an FTP session into the VAL circuit pack involves:
1. Preparing the VAL circuit pack for the FTP session, which
allows an FTP session on an individual VAL circuit pack.
●
creates an ftp-login and ftp-password for that session.
●
2. Starting an FTP session from a computer or network management terminal. Before you can
start the FTP session, you need to know
the VAL circuit pack's IP address from Step 1.
●
the VAL circuit pack's ftp-login and ftp-password from Step 1.
●
Managing VAL Announcements Using FTP
Issue 1 June 2005
473