Avaya Communication Manager Administrator's Manual page 564

Administering Media Servers
Configuring the remote PC for PPP modem connection (Windows 2000 or
XP, Terminal Emulator, or ASA)
To configure the remote PC for PPP modem connection:
1. On your PC's desktop, right-click My Network Places and click Properties.
The system diplays the Network and Dial-up Connections screen.
2. Double-click the connection name you made in the previous task,
Modem Connection to the Media Server (Windows 2000 or XP)
Note:
Depending on your system, the Connect screen may appear, from which you
Note:
must select Properties.
3. Click the Security tab.
4. Select the Advanced (custom settings) radio button.
5. Check the Show terminal window checkbox.
6. Click the Networking tab.
7. In the Components box, verify that Internet Protocol (TCP/IP) and Client for Microsoft
Netwrks are both checked.
8. Select Internet Protocol (TCP/IP) and click Properties.
9. Click the Advanced button.
10. Uncheck (clear) the Use default gateway on remote network box.
11. Click OK three times to exit and save the changes.
Using Windows for PPP Modem Connection (Windows 2000 or XP)
This connection requires you to have a modem on your PC. It also requires you to do the
following first:
- Setting up Windows for Modem Connection to the Media Server (Windows 2000 or
XP) on page 563
- Configuring the remote PC for PPP modem connection (Windows 2000 or XP, Terminal
Emulator, or ASA)
To use Windows for PPP modem connection:
1. Return to the Network and Dial-up Connections screen and right-click the connection you
just created.
2. Select Connect.
3. Leave the User Name, Password, and Domain fields blank. If the Dial field is blank, enter
the appropriate telephone number.
564 Administrator Guide for Avaya Communication Manager
on page 564.
Setting up Windows for
on page 563.