Avaya Communication Manager Administrator's Manual page 454

Managing Announcements
To set up the data module on an announcement circuit pack:
1. Type add data-module next and press Enter.
The Data Module
The system automatically fills in the number of the next available extension. Make sure the
extension conforms to your dial plan. If you want to assign a specific extension, type that
extension in the command instead of next.
Figure 187: Data Module screen
change data-module 30
Data Extension: 30
ABBREVIATED DIALING
List1:
SPECIAL DIALING OPTION:
ASSIGNED MEMBER (Station with a data extension button for this data module)
2. In the Name field, type announcement data module.
3. In the Type field, type announcement and press Enter.
The Port field automatically changes to Board.
4. In the Board field, type the board location of the announcement circuit pack.
5. Press Enter to save your changes.
454 Administrator Guide for Avaya Communication Manager
screen appears.
Type: announcement
Port: _______
ITC: restricted
Ext Name
1: 1002 27 character
DATA MODULE
Name: 27
COS: 1 Remote Loop-Around Test?
COR: 1 Secondary data module?
TN: 1
station name
Page 1 of 2
BCC:
Connected to: dte