Avaya Communication Manager Administrator's Manual page 33

Note:
You cannot delete a daylight savings rule if it is in use on either the Locations or
Note:
Date and Time screens. However, you can change any rule except rule 0 (zero).
3. Complete the Stop fields for rule 1.
a. Type Sunday in the Change Day field.
b. Type October in the Month field.
c. Type 25 in the Date field.
d. Type 2:00 in the Time field.
This information specifies the day, month, date, and time you want the system clock to
transition back to standard time.
4. Press Enter to save your changes.
Displaying daylight savings time rules
To display daylight savings time rules:
1. Type display daylight-savings-rules and press Enter.
The Daylight Savings Rules
Setting the system date and time
Update the date and time for events such as a leap year, the change to or from daylight savings
time, or a system restart after a power failure. The correct date and time assure that CDR
records are correct. CDR does not work until the date and time have been entered.
Note:
Changing the date and time may modify CDR data by 9 hours and 59 minutes.
Note:
Therefore, you should change the date and time after normal business hours.
After you change the date and time, review the time settings for any adjunct
(other than AUDIX) linked to your system that uses the system time.
Before you can set the date and time, you need to know whether it is currently daylight savings
or standard time and know which daylight savings rule number you want to use. Daylight
savings rule numbers are located on the
screen appears. Verify the information you entered is correct.
Daylight Savings Rules
Establishing Daylight Savings Rules
screen.
Issue 1 June 2005 33