Avaya Communication Manager Administrator's Manual page 428

Managing Trunks
Instructions
As an example, we will set up a new PCOL group and administer the group as a CO trunk for
two-way voice traffic.
To add the new PCOL group:
1. Type add personal-co-line next and press Enter.
The Personal CO Line Group
Figure 178: Personal CO Line Group screen
Group Number: 1
Group Name: OUTSIDE CALL
Security Code: ___
TRUNK PARAMETERS
Answer Supervision Timeout: ___
2. In the Group Type field, type co.
This field specifies the kind of trunk group you're creating. PCOL groups can be
administered as CO, FX, or WATS trunks.
3. In the Group Name field, type Outside calls.
This name will be displayed, along with the group number, for outgoing calls if you set the
Outgoing Display? field to y. You can type any name up to 27 characters long in this field.
(You may want to put the telephone number here that's assigned to this trunk.)
4. In the TAC field, type 111.
This field defines a unique code that you or your users can dial to access this trunk group.
The code also identifies this trunk group in call detail reports.
428 Administrator Guide for Avaya Communication Manager
screen appears.
PERSONAL CO LINE GROUP
Outgoing Display? _
Trunk Type: ground-start
Trunk Port: 01D1901_
Trunk Name: __________
Outgoing Dial Type: tone_____
Prefix-1? y
Trunk Gain: high
Charge Conversion: 1____
Decimal Point: none__
Currency Symbol: ___
Charge Type: units__
Group Type: co
Coverage Path: ____
Trunk Direction: two-way
Disconnect Timing(msec): 500
Trunk Termination: rc____
Analog Loss Group: 7
Digital Loss Group: _
Receive Answer Supervision? _
Page 1 of X
CDR Reports: y
TAC: ____
Data Restriction? _
Country: 1