Using Tti To Move Phones; Setting Up - Avaya Communication Manager Administrator's Manual

Figure 27: Station screen
change station 1234
FEATURE OPTIONS
LWC Log External Calls? n
Redirect Notification? y
Per Button Ring Control? n
Bridged Call Alerting? n
Active Station Ringing: single
H.320 Conversion? n
Service Link Mode: as-needed
MWI Served User Type: ______
Recall Rotary Digit? n
Remote Softphone Emergency Calls: as-on-local
Emergency Location Ext: 75001
3. Type always in the Automatic Moves field.
4. Press Enter to save your changes.

Using TTI to Move Phones

Terminal Translation Initialization (TTI) allows you to merge an x-ported station to a valid port by
dialing a TTI merge code, a system-wide security code, and the x-port extension from a
telephone connected to that port. TTI also allows you to separate an extension from its port by
dialing a similar separate digit sequence. This action causes the station to revert to an x-port.
TTI can be used for implementing telephone and data module moves from office to office. That
is, you can separate a telephone from its port with TTI, unplug the telephone from the jack, plug
in the telephone in a jack in a different office, and merge the telephone to its new port with TTI.
If you are moving phones and concerned about security, you may also want to see
Personal Station Access
each extension.
LWC Reception? spe
LWC Activation? y
CDR Privacy? n
Multimedia Mode: basic
Automatic Moves: always
AUDIX Name:
on page 365 for more information about setting the security code for
STATION
Auto Select Any Idle Appearance? n
Idle Appearance Preference? n
Per Station CPN - Send Calling Number? _
Display Client Redirection? n
Select Last Used Appearance? n
_ Coverage After Forwarding? _
Direct IP-IP Audio Connections? n
Using TTI to Move Phones
Page 2 of X
Coverage Msg Retrieval? y
Auto Answer: none
Data Restriction? n
Restrict Last Appearance? y
Multimedia Early Answer? n
IP Audio Hairpinning? n
Issue 1 June 2005

Setting up

91