Avaya Communication Manager Administrator's Manual page 499

Figure 197: Intercom Group screen
GROUP MEMBER ASSIGNMENTS
1: 2010
2: 2011
3: 2012
4: 2013
5: 2014
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
2. Type 1 in the Length of Dial Code field.
Dial codes can be 1 or 2 digits long.
3. On row 1, type 2010 in the Ext field.
4. On row 1, type 1 in the DC field.
This is the code a user will dial to make an intercom call to extension 2010. The length of
this code must exactly match the entry in the Length of Dial Code field.
5. Repeat steps 3 and 4 for the remaining extensions.
Dial codes don't have to be in order. Communication Manager fills in the Name field with the
name from the Station screen when you save changes.
6. Press Enter to save your changes.
To allow users to make intercom calls, you must administer feature buttons on the phones in the
intercom group. You can administer buttons for dial intercom, automatic intercom, or both on
multi-appearance phones. You can't administer either intercom feature on single-line phones,
but you can assign single-line phones to intercom groups so those users can receive intercom
calls.
As an example, we will set up automatic intercom between extensions 2010 (dial code = 1) and
2011 (dial code = 2) in intercom group 1.
INTERCOM GROUP
Ext DC Name
1 B. Smith
2 L. Yu
3 R. Munoz
4 K. Mancetti
9 N. Mitchell
Using Telephones as Intercoms
Group Number: 1
Length of Dial Code: 1
Issue 1 June 2005 499