Avaya Communication Manager Administrator's Manual page 570

Administering Media Servers
9. Click the Modem tab.
The system displays the Modem tab.
10. In the IP address field, type the IP address of the connection Dialup Status box as noted in
Step 9.
11. In the TCP/IP port number field, type 5023 to log in directly to the Communication Manager
SAT command line.
12. In the Modem field, use the dragdown box to select the type of modem that your PC uses.
13. In the Serial port field, select the COM port you are using for your modem connection.
14. In the Baud rate field, select 9600 from the dragdown box.
15. Click the Dial Numbers tab.
The system displays the Display Numbers tab.
16. Type the telephone number of the Media Server as appropriate. Enter 1 in the Country
Code field for long-distance.
17. Click OK.
18. On the Connections screen, double-click. the name of the connection you just set up.
19. The PC dials up the Media Server, and when connected, the login prompt for the
Communication Manager software appears.
20. Log in to Communication Manager to access the SAT command prompt screen.
Configuring Avaya Site Administration
When Avaya Site Administration is initially installed on a client machine, it needs to be
configured to communicate with Communication Manager on the Media Server.
When it runs initially, after downloading, you need to create a new entry for the switch
connection. To create new entries for the switch, follow the procedure
Administration Item
Adding a Switch Administration Item
1. Click File > New > Voice System.
The system displays the Add Voice System screen .
2. Enter a name in the Voice System Name: field.
3. Click Next. The connection type dialog box displays.
4. Click the Network connection radio button.
5. Click Next. The Network Connection dialog box displays.
6. Enter the IP address used to connect to the Media Server.
570 Administrator Guide for Avaya Communication Manager
on page 570.
Adding a Switch