Avaya Communication Manager Administrator's Manual page 569

11. In the TCP/IP port number field, type 5023 to log in directly to the Communication Manager
SAT command line.
12. Click OK.
The Connection Settings screen disappears.
13. On the Connections screen, double-click the name of the connection you just set up.
The Login prompt for the Communication Manager software appears.
14. Log in to Communication Manager to access the SAT command screen.
Using Avaya Terminal Emulator for Modem Connection to Communication
Manager
This connection requires you to have a modem on your PC. It also requires you to do the
following first:
- Setting up Windows for Modem Connection to the Media Server (Windows 2000 or
XP) on page 563
- Configuring the remote PC for PPP modem connection (Windows 2000 or XP, Terminal
Emulator, or ASA)
Once the Terminal Emulator is installed on your PC and you have a modem attached and
configured to both your PC and the Media Server, use the following steps to establish a modem
connection to your Media Server.
1. Double-click the Terminal Emulator icon off of your desktop. Alternatively, go to the Start
menu, select Programs, then select Avaya, and finally select Terminal Emulator.
The system displays the Terminal Emulator.
2. From the menu bar across the top of the screen, select Phones, then select Connection
List.
The system displays the Connections screen.
3. From the menu bar across the top, select Connection, then select New Connection.
The system displays the Connection Settings screen.
4. Put in a name for the connection. Usually, this will be the name of your Media Server.
5. In the Host window, click Telnet.
6. Click the Emulation tab at the top.
The system displays the Emulation tab.
7. From the Emulator dragdown box, select the emulator you desire, usually 513BCT (default),
AT&T 4410, AT&T or DECVT100.
8. In the Keyboard window, select pbx.
on page 564
Administering Call-processing
Issue 1 June 2005 569