Avaya Communication Manager Administrator's Manual page 901

Network Management Protocol
This field appears only if the Framing Mode field is esf.
Valid entries
tabs
Send ANSI-T1.403 One-Second Performance Reports
This field selects whether your DS1 circuit pack will send error reports to the far-end server/
switch. These reports are useful for network management, and are sent at 1-second intervals
when enabled. This field appears only if the Framing Mode field is esf. It is used only with
circuit packs that have an integrated channel service unit (CSU).
Valid entries
y/n
INTEGRATED CSU OPTIONS
Receive ALBO (Receive Automatic Line Build-Out)
This field increases the strength of incoming signals by a fixed amount to compensate for line
losses.
Valid entries
26db
36db
Usage
The entry in this field, used only with circuit packs that
have an integrated channel service unit (CSU), allows
the data link to be remotely monitored.
Usage
Enter n. Consult your Avaya technical support
representative if you think you may want to use these
reports.
Usage
To set this field correctly, you should measure the signal
loss on this specific facility. However, you may enter
26db for most applications. 36db is occasionally
appropriate, mainly on campus networks that don't
conform to public telephone network standards.
DS1 Circuit Pack
Issue 1 June 2005 901