Avaya Communication Manager Administrator's Manual page 470

Managing Announcements
Deleting VAL announcements
Before you start
Look up the announcement information:
1. For a VVAL, type list directory board nnnnn, where nnnnn is the board location, to
display the announcements directory. For a TN2501AP VAL board, type list directory
board nnnnn/annc (adding the /annc extension) to reach the announcement directory.
Press Enter.
2. Determine which announcement(s) that you want to delete, either by extension or filename.
3. Decide whether you are
Deleting individual VAL announcement files using the SAT
●
Deleting all VAL announcements on a circuit pack using the SAT
●
Deleting and Erasing Announcements
●
Note:
The system denies any attempt to delete an announcement while it is playing,
Note:
being transferred, or backed up to FLASH (amber LED flashes), regardless of
whether the attempt is from a system telephone, the SAT, or through an FTP
session.
Deleting individual VAL announcement files using the SAT
To delete the announcement named Closed:
1. At the SAT, type remove file board board-location /annc/filename.wav and
press Enter.
For example, to delete the announcement, type:
remove file board 01A11 /annc/Closed.wav
Note:
Filenames are case-sensitive and require the .wav file extension.
Note:
The /annc portion of the command directs the system to the announcement
subdirectory on the VAL circuit pack, and /Closed.wav indicates to delete the
filename "Closed.wav."
470 Administrator Guide for Avaya Communication Manager