Avaya Communication Manager Administrator's Manual page 687

(Starting) Port
Enter the necessary characters.
Valid entries
01 to 03
(DEFINITY CSI) or
1 to 64
(S8700 Series
IP-Connect / S8700
Series Multi-Connect /
S8300 Media Server)
A to E
0 to 20
01 to 04
(Analog TIE trunks)
01 to 31
1 to 80
(DEFINITY CSI) or
1 to 250
(S8700 Series
IP-Connect / S8700
Series Multi-Connect /
S8300 Media Server)
V1 to V9
01 to 31
For example, 01A0612 is in cabinet 01, carrier A, slot 06, and circuit number (port) 12.
Note:
For Wideband Access Endpoints, analog tie trunks cannot be used and the DS1
Note:
Interface circuit pack, Version C or later, must be used.
The DS1 circuit number corresponds to the channel that will carry the data traffic. Channels 1
through 31 (DS1 Interface only) or channels 1 through 24 (DS1 Tie Trunk, DS1 Interface, or
DS1 Interface (32) circuit packs) can be used when the DS1 Signaling Type field is
robbed-bit or isdn-ext. For Common Channel or ISDN-PRI signaling, channel use is limited to
channels 1 through 30 (DS1 Interface circuit pack only) or channels 1 through 23 (DS1
Interface (32) or DS1 Interface ). A channel can be administered as an access endpoint
regardless of the DS1 signaling type.
Usage
First and second characters are the cabinet
number.
Third character is the carrier.
Fourth and fifth characters are the slot
number.
Six and seventh characters are the circuit
number.
Gateway
Module
Circuit
Access Endpoint
Issue 1 June 2005 687