Avaya Communication Manager Administrator's Manual page 477

Instructions
To delete an announcement on a TN2501AP circuit pack through an FTP session:
1. Ensure that the steps in
2. At the computer client, type delete filename.wav and press Enter.
Example: delete Closed.wav
Note:
The announcement file is only removed from volatile RAM memory.
Note:
Approximately 5 minutes later, the file is removed from nonvolatile ROM flash
memory.
3. List the contents of the announcement directory and ensure that the file is not listed.
Note:
The .wav file extension on the announcement files are visible when you view the
Note:
announcement directory from the FTP client.
4. Terminate the FTP session (see
5. At the SAT, type change announcements and press Enter.
The Announcements/Audio Sources screen appears.
6. Remove the announcement administration by deleting the entire line associated with the
announcement.
7. Press Enter to save your changes.
Moving announcements to a VAL circuit pack or to another LAN device
You can copy an announcement file to the VAL circuit pack to another LAN device.
Before you start
Know the announcement filename and its location on the client computer.
●
Know the destination IP address, the filename, and circuit pack location of the
●
announcement and VAL circuit pack to which you are moving the announcement. To find
this information, type list directory board nnnnn, where nnnnn is the board
location, to display the announcements directory for a VVAL. For a TN2501AP VAL board,
type list directory board nnnnn/annc (adding the /annc extension) to reach the
announcement directory.
Ensure that you have not just administered the announcement on the Announcements/
●
Audio Sources screen. If announcement administration precedes the file transfer, then
- the announcement appears with a zero (0) length on the list integrated-annc-boards
screen.
- The Time Remaining fields on the Integrated Announcement Boards screen (using
either the list or display commands) do not refresh to reflect the presence of the new
announcement file on the circuit pack.
Setting up an FTP session
Ending an FTP session
Managing VAL Announcements Using FTP
on page 473 are complete.
on page 479).
Issue 1 June 2005 477