Show Ip Slb Cluster - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip slb cluster

Displays detailed statistics and configuration information for a single Server Load Balancing (SLB) clus-
ter. This command also displays traffic statistics for single QoS policy condition cluster.
show ip slb cluster name [statistics]
Syntax Definitions
name
statistics
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
Use the statistics parameter to display the total number of packets that were passed to the cluster because
they met the QoS condition criteria configured for that cluster. The polling interval used to obtain such
statistics is every 15 minutes. See the second example below:
Examples
-> show ip slb cluster Intranet
Cluster Intranet
VIP
Type
Admin status
Operational status
Ping period (seconds)
Ping timeout (milliseconds)
Ping retries
Probe
Number of packets
Number of servers
Server 128.241.130.4
Admin status = Enabled, Operational Status = In Service,
Availability (%) = 98
Server 128.241.130.5
Admin status = Enabled, Operational Status = Discovery,
Availability (%) = 0
output definitions
Cluster
VIP
Type
page 26-36
Specifies the name of the SLB cluster.
Displays SLB statistics for the specified cluster.
: 128.241.130.205,
: L3
: Enabled,
: In Service,
: 60,
: 3000,
: 3,
: None,
: 45768,
: 2
The name of this Server Load Balancing (SLB) cluster.
The virtual IP (VIP) address for this Server Load Balancing (SLB)
cluster.
The classifier for the hypothetical packet, which can be L2 or L3.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012