Show Isis Interface - Dell Force10 C150 Configuration Manual

show isis graceful-restart detail
Use the
related configuration.
Figure 23-4. Command Example:
FTOS#show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart
Interval/Blackout time
T3 Timer
T3 Timeout Value
T2 Timeout Value
T1 Timeout Value
Adjacency wait time
Operational Timer Value
======================
Current Mode/State
T3 Time left
T2 Time left
Restart ACK rcv count
Restart Req rcv count
Suppress Adj rcv count
Restart CSNP rcv count
Database Sync count
Circuit GigabitEthernet 2/10:
Mode: Normal L1-State:NORMAL, L2-State: NORMAL
L1: Send/Receive: RR:0/0, RA: 0/0, SA:0/0
T1 time left: 0, retry count left:0
L2: Send/Receive: RR:0/0, RA: 0/0, SA:0/0
T1 time left: 0, retry count left:0
FTOS#

show isis interface

Use the
IS-IS routing along with the defaults.
command in EXEC Privilege mode to view all Graceful Restart
show isis graceful-restart detail
: Enabled
: 1 min
: Manual
: 30
: 30 (level-1), 30 (level-2)
: 5, retry count: 1
: 30
: Normal/RUNNING
: 0
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
command in EXEC Privilege mode to view all interfaces configured with
Intermediate System to Intermediate System | 519