Layer 2 Commands - Dell PowerEdge M420 Reference Manual

• v6ACL — IPv6 Access List Configuration
• v6CMC — IPv6 Class-Map Configuration
• v6DP — IPv6 DHCP Pool Configuration

Layer 2 Commands

AAA
Command
aaa authentication dot1x
default
aaa authentication enable
aaa authentication login
aaa authorization network
default radius
aaa ias-user username
clear aaa ias-users
enable authentication
enable password
ip http authentication
ip https authentication
login authentication
password (IAS)
password
password
show aaa ias-users
Description
Specifies an authentication method for 802.1x
clients.
Defines authentication method lists for
accessing higher privilege levels.
Defines login authentication.
Enables the switch to accept VLAN assignment
by the RADIUS server.
Configures IAS users and their attributes. Also
changes the mode to aa user config mode.
Deletes all IAS users.
Specifies the authentication method list when
accessing a higher privilege level from a remote
telnet or console.
Sets a local password to control access to the
normal level.
Specifies authentication methods for http.
Specifies authentication methods for https.
Specifies the login authentication method list
for a remote telnet or console.
Configures a password for a user.
Specifies a password on a line.
Specifies a user password
Displays configured IAS users and their
attributes.
Command Groups
a
Mode
GC
GC
GC
GC
GC
PE
LC
GC
GC
GC
LC
AAA
LC
UE
PE
79