Dell PowerEdge M420 Reference Manual page 75

Table 1-1. System Command Groups
Command Group
IPv6 MLD Snooping
Querier
Link Dependency
LLDP
Port Aggregator
Port Channel
Port Monitor
QoS
Radius
Spanning Tree
TACACS+
VLAN
802.1x
Layer 3 Commands
ARP (IPv4)
DHCP Server and Relay
Agent (IPv4)
DHCPv6
DVMRP (Mcast)
IGMP (Mcast)
IGMP Proxy (Mcast)
IP Helper/DHCP Relay
IP Routing (IPv4)
IPv6 Multicast
IPv6 Routing
(continued)
Description
Configures IPv6 Snooping Querier and displays IPv6
Snooping Querier information.
Configures and displays link dependency information.
Configures and displays LLDP information.
Provides server administrators the ability to map internal
ports to external ports easily.
Configures and displays Port channel information.
Monitors activity on specific target ports.
Configures and displays QoS information.
Configures and displays RADIUS information.
Configures and reports on Spanning Tree protocol.
Configures and displays TACACS+ information.
Configures VLANs and displays VLAN information.
Configures and displays commands related to 802.1x
security protocol.
Manages Address Resolution Protocol functions.
Manages DHCP/BOOTP operations on the system.
Configures IPv6 DHCP functions.
Configures DVMRP operations.
Configures IGMP operations.
Manages IGMP Proxy on the system.
Configures relay of UDP packets.
Configures IP routing and addressing.
Manages IPv6 Multicasting on the system.
Configures IPv6 routing and addressing.
Command Groups
75