Dell PowerEdge M420 Reference Manual page 81

Command
show service-acl interface
show ip access-lists
show mac access-list
a. For the meaning of each Mode abbreviation, see Mode Typeson page 77.
Address Table
Command
clear mac address-table
mac address-table aging-
time
mac address-table multicast
filtering
mac address-table multicast
forbidden address
mac address-table multicast
forbidden forward-
unregistered
mac address-table multicast
forward-all
mac address-table multicast
forward-unregistered
mac address-table multicast
static
mac address-table static
port security
Description
Displays the status of LLPF rules configured on
a particular port or on all the ports.
Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
Displays a MAC access list and all of the rules
that are defined for the ACL.
Description
Removes any learned entries from the
forwarding database.
Sets the address table aging time.
Enables filtering of Multicast addresses.
Forbids adding a specific Multicast address to
specific ports.
Forbids a port to be a forwarding-unregistered-
multicast-addresses port.
Enables forwarding of all Multicast packets on a
port.
Enables the forwarding of unregistered
multicast addresses.
Registers MAC-layer Multicast addresses to the
bridge table, and adds static ports to the group.
Adds a static MAC-layer station source address
to the bridge table.
Disables new address learning on an interface.
Command Groups
a
Mode
PE
PE
PE
a
Mode
PE
GC
GC
IC
IC
IC
IC
IC
IC
IC
81