Protocol Group; Protocol Vlan Group - Dell Force10 S2410-01-10GE-24P Command Reference Manual

priority (VLAN)
Mode
Command
History
Related
Commands

protocol group

Syntax
Default
Mode
Command
History
Related
Commands

protocol vlan group

| VLAN Commands
132
Configure the priority for untagged frames.
Interface VLAN
Version 2.5.1 Removed from CLI
Version 2.3 Deprecated
tagged Sets tagging to enabled for a specific port (or range of ports) in the selected VLAN.
Attach a group ID to the selected VLAN. A group ID can only be associated with one VLAN at a time.
However, the VLAN association can be changed. The referenced VLAN should be created prior to the
creation of the protocol-based VLAN, except when GVRP is expected to create the VLAN.
[no] protocol group
groupid
The no version of this command removes the group ID from this VLAN.
None
Interface VLAN
Version 2.3
Modified: Removed
Interface VLAN.
interface vlan Configure a VLAN and enter Interface VLAN mode.
show vlan Displays information about VLANs, either detailed information for a specific
VLAN or summary information for all configured VLANs.
show port Displays port information for a selected port or for all ports
vlan protocol group Adds a protocol-based VLAN group to the system.
vlan protocol group
Add the named protocol to the protocol-based VLAN identified by
add protocol
This command adds the physical unit/slot/port interface to the protocol-based VLAN identified by
groupid . A group may have more than one interface associated with it. Each interface and protocol
combination can only be associated with one group. If adding an interface to a group causes any
conflicts with protocols currently associated with the group, this command will fail and the interface(s)
will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
vlanid
parameter and changed mode from VLAN Database mode to
groupid
.