Show Multicast Mrinfo; Table 353: Show Multicast Mrinfo Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show multicast mrinfo

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 353: show multicast mrinfo Output Fields

Field Name Field Description
Query address, hostname (DNS name or IP address of the source address), and multicast protocol
source-address
version or the software version of another vendor.
Queried router interface address and directly attached neighbor interface address, respectively.
ip-address-1--->ip-address-2
or Name or IP address of neighbor.
(name ip-address)
Neighbor's multicast profile:
[metric/threshold/type/
flags]
Copyright © 2010, Juniper Networks, Inc.
show multicast mrinfo
<host>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display configuration information about IP multicast networks, including neighboring
multicast router addresses.
—Display configuration information about all multicast networks.
none
—(Optional) Display configuration information about a particular host. Replace host
host
with a hostname or IP address.
view
show multicast mrinfo on page 2690
Table 353 on page 2689 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—Always has a value of
metric
—Multicast threshold time-to-live (TTL). The range of values is
threshold
—Multicast connection type:
type
flags —Flags for this route:
querier —Queried router is the designated router for the neighboring session.
—Link is a leaf in the multicast network.
leaf
—Link status indicator.
down
Chapter 86: Operational Commands for IGMP Snooping and Multicast
, because queries the directly connected interfaces of a device.
1 mrinfo
or .
pim tunnel
show multicast mrinfo command.
through .
0 255
2689