Complete Software Guide for Junos
mtrace monitor
Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2662
®
OS for EX Series Ethernet Switches, Release 10.4
mtrace monitor
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Listen passively for IP multicast responses.To exit
none
—Trace the master instance.
view
mtrace monitor on page 2663
Table 342 on page 2662 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 342: mtrace monitor Output Fields
Field Name
Mtrace query at
by
resp to
qid
packet from...to
from...to
via group
mxhop
mtrace monitor
Field Description
Date and time of the query.
Address of the host issuing the query.
Response destination.
Query ID number.
IP address of the query source and default group destination.
IP address of the multicast source and the response address.
IP address of the group to trace.
Maximum hop setting.
, type Ctrl+c.
mtrace monitor
command.
Copyright © 2010, Juniper Networks, Inc.