Show Pim Source - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show pim source

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2732
®
OS for EX Series Ethernet Switches, Release 10.4
show pim source
<brief | detail>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<source-prefix>
show pim source
<brief | detail>
<inet | inet6>
<instance instance-name>
<source-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Display information about the Protocol Independent Multicast (PIM) source reverse path
forwarding (RPF) state.
—Display standard information about the PIM RPF state for all supported family
none
addresses for all routing instances.
brief | detail —(Optional) Display the specified level of output.
—(Optional) Display information for IPv4 or IPv6 family addresses, respectively.
inet | inet6
instance instance-name —(Optional) Display information about the RPF state for a specific
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
source-prefix —(Optional) Display the state for source RPF states in the given range.
view
show pim source on page 2733
show pim source brief on page 2733
show pim source detail on page 2733
Table 367 on page 2732 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 367: show pim source Output Fields
Field Name Field Description
Name of the routing instance.
Instance
—(Optional) Perform this operation on all logical
show pim source
Copyright © 2010, Juniper Networks, Inc.
command.