Table 369: Components Of The Topology - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Table 369: Components of the Topology

Property
Switch hardware
VLAN name
One RADIUS server
Configuration
CLI Quick
Configuration
Step-by-Step
Procedure
Results
2768
®
OS for EX Series Ethernet Switches, Release 10.4
Settings
EX4200 access switch, 24 Gigabit Ethernet ports: 8 PoE ports (
) and 16 non-PoE ports (
ge-0/0/7
default
Backend database with an address of
ge-0/0/10
In this example, connect the RADIUS server to access port
switch. The switch acts as the authenticator and forwards credentials from the supplicant
to the user database on the RADIUS server. You must configure connectivity between
the EX4200 and the RADIUS server by specifying the address of the server and configuring
the secret password. This information is configured in an access profile on the switch.
NOTE: For more information about authentication, authorization, and
accounting (AAA) services, see the
To quickly connect the RADIUS server to the switch, copy the following commands and
paste them into the switch terminal window:
[edit]
set access radius-server 10.0.0.100 secret juniper
set access profile profile1 authentication-order radius
set access profile profile1 radius authentication-server 10.0.0.100 10.2.14.200
To connect the RADIUS server to the switch:
Define the address of the server, and configure the secret password. The secret
1.
password on the switch must match the secret password on the server:
[edit access]
user@switch# set radius-server 10.0.0.100 secret juniper
Configure the authentication order, making
2.
[edit access profile]
user@switch# set profile1 authentication-order radius
Configure a list of server IP addresses to be tried in order to authenticate the
3.
supplicant:
[edit access profile]
user@switch# set profile1 radius authentication-server 10.0.0.100 10.2.14.200
Display the results of the configuration:
user@switch> show configuration access
radius-server {
10.0.0.100
through )
ge-0/0/8 ge-0/0/23
connected to the switch at port
10.0.0.100
ge-0/0/10
Junos OS System Basics Configuration Guide
the first method of authentication:
radius
Copyright © 2010, Juniper Networks, Inc.
through
ge-0/0/0
on the EX4200
.