Show Pim Bootstrap; Table 362: Show Pim Bootstrap Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show pim bootstrap

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
2712
®
OS for EX Series Ethernet Switches, Release 10.4
show pim bootstrap
<instance instance-name>
<logical-system (all | logical-system-name)>
show pim bootstrap
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
instance option introduced in Junos OS Release 10.0 for EX Series switches.
For sparse mode only, display information about Protocol Independent Multicast (PIM)
bootstrap routers.
none —Display PIM bootstrap router information for all routing instances.
—(Optional) Display information about bootstrap routers for a
instance instance-name
specific PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show pim bootstrap on page 2713
show pim bootstrap instance on page 2713
Table 362 on page 2712 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 362: show pim bootstrap Output Fields

Field Name
Instance
BSR
Pri
Local address
Pri
State
Timeout
—(Optional) Perform this operation on all logical
Field Description
Name of the routing instance.
Bootstrap router.
Priority of the routing device to be elected to be the bootstrap router.
Local routing device's address.
Local routing device's address priority to be elected as the bootstrap
router.
Local routing device's election state:
How long until the local routing device declares the bootstrap router
to be unreachable, in seconds.
command.
show pim bootstrap
, , or
Candidate Elected Ineligible
Copyright © 2010, Juniper Networks, Inc.
.