Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2915

Verification
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
}
voice-vlan {
vlan-id 99;
}
}
ethernet-switching options {
voip {
interface ge-0/0/2.0 {
vlan voice-vlan;
forwarding-class assured-forwarding;
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying LLDP-MED Configuration on page 2811
Verifying Authentication for the Desktop PC on page 2812
Verifying the VLAN Association with the Interface on page 2812
Verifying LLDP-MED Configuration
Verify that LLDP-MED is enabled on the interface.
user@switch> show lldp detail
LLDP : Enabled
Advertisement interval : 30 Second(s)
Transmit delay : 2 Second(s)
Hold timer : 2 Second(s)
Config Trap Interval : 300 Second(s)
Connection Hold timer : 60 Second(s)
LLDP MED : Enabled
MED fast start count : 3 Packet(s)
Interface LLDP
all Enabled
ge-0/0/2.0 -
Interface VLAN-id
ge-0/0/0.0 0
ge-0/0/1.0 0
ge-0/0/2.0 0
ge-0/0/2.0 99
ge-0/0/3.0 0
ge-0/0/8.0 0
ge-0/0/10.0 0
ge-0/0/11.0 20
ge-0/0/23.0 0
LLDP basic TLVs supported:
Chassis identifier, Port identifier, Port description, System name, System
description, System capabilities, Management address.
LLDP 802 TLVs supported:
Chapter 88: Examples: Access Control Configuration
LLDP-MED Neighbor count
- 0
Enabled 0
VLAN-name
default
employee-vlan
data-vlan
voice-vlan
employee-vlan
employee-vlan
default
employee-vlan
default
2811