Show Pim Neighbors - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show pim neighbors

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 365: show pim neighbors Output Fields
Field Name Field Description
Instance Name of the routing instance.
Interface through which the neighbor is reachable.
Interface
Copyright © 2010, Juniper Networks, Inc.
show pim neighbors
<brief | detail>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show pim neighbors
<brief | detail>
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Display information about Protocol Independent Multicast (PIM) neighbors.
none —(Same as ) Display standard information about PIM neighbors for all supported
brief
family addresses for all routing instances.
brief | detail —(Optional) Display the specified level of output.
—(Optional) Display information about PIM neighbors for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
instance instance-name —(Optional) Display information about neighbors for the specified
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show pim neighbors on page 2725
show pim neighbors brief on page 2725
show pim neighbors instance on page 2725
show pim neighbors detail on page 2725
show pim neighbors detail (with BFD) on page 2725
Table 365 on page 2723 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 86: Operational Commands for IGMP Snooping and Multicast
—(Optional) Perform this operation on all logical
show pim neighbors command.
Level of Output
All levels
All levels
2723