Show Pim Join - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show pim join

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
show pim join
<brief | detail | extensive | summary>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
<range>
show pim join
<brief | detail | extensive | summary>
<inet | inet6>
<instance instance-name>
<range>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.6.
summary
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Display information about Protocol Independent Multicast (PIM) groups.
—Display the standard information about PIM groups for all supported family
none
addresses for all routing instances.
brief | detail | extensive | summary
—(Optional) Display PIM group information for IPv4 or IPv6 family addresses,
inet | inet6
respectively.
—(Optional) Display information about groups for the specified
instance instance-name
PIM-enabled routing instance only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Address range of the group, specified as
range
view
clear pim join on page 2653
show pim join summary on page 2719
show pim join on page 2719
show pim join instance on page 2720
show pim join detail on page 2720
show pim join extensive on page 2720
show pim join instance extensive on page 2721
Chapter 86: Operational Commands for IGMP Snooping and Multicast
—(Optional) Display the specified level of output.
—(Optional) Perform this operation on all logical
.
prefix/prefix-length
2717