Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2819

For ex series ethernet switches
Table of Contents

Advertisement

Table 363: show pim interfaces Output Fields (continued)
Field Name
Field Description
PIM mode running on the interface:
Mode
Sparse
routing devices do not forward multicast traffic to this routing device unless this device has sent
an explicit request (using a join message) to receive multicast traffic.
Dense
request, dense mode implements a flood-and-prune mechanism, similar to DVMRP (the first
multicast protocol used to support the multicast backbone).
Sparse-Dense
sparse or dense mode. A group specified as
Instead, data packets destined for that group are forwarded using PIM-Dense Mode (PIM-DM)
rules. A group specified as
PIM-Sparse Mode (PIM-SM) rules.
IP
Version number of the address family on the interface:
V
PIM version running on the interface:
State
State of PIM on the interface:
DR
NotDR
P2P
NbrCnt
Number of neighbors that have been seen on the interface.
Number of (s,g) join messages that have been seen on the interface.
JoinCnt(sg)
Number of (*,g) join messages that have been seen on the interface.
JointCnt(*g)
Address of the designated router.
DR address
show pim interfaces
show pim interfaces
Copyright © 2010, Juniper Networks, Inc.
—In sparse mode, routing devices must join and leave multicast groups explicitly. Upstream
—Unlike sparse mode, where data is forwarded only to routing devices sending an explicit
—Sparse-dense mode allows the interface to operate on a per-group basis in either
sparse
—Designated router.
—Not the designated router.
—Point to point.
user@host> show pim interfaces
Instance: PIM.master
Name
Stat Mode
address
fe-0/0/0.0
Up
10.10.10.2
fe-0/0/3.0
Up
20.20.20.2
lo0.0
Up
10.255.72.54
pe-1/2/0.32769
Up
t1-0/1/0.0
Up
lo0.0
Up
fe80::2a0:a5ff:fe5e:209
Chapter 86: Operational Commands for IGMP Snooping and Multicast
is not mapped to a rendezvous point (RP).
dense
is mapped to an RP, and data packets are forwarded using
4
(IPv4) or
1
or
2
.
IP V State NbrCnt JoinCnt(sg) JointCnt(*g) DR
Sparse
4 2 DR
Sparse
4 2 DR
Sparse
4 2 DR
Sparse
4 2 P2P
Sparse
4 2 P2P
Sparse
6 2 DR
6
(IPv6).
1
1
1
1
0
0
0
0
1
0
0
0
3
3
0
0
0
0
2715

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents