Chapter 88 Examples: Access Control Configuration; Example: Connecting A Radius Server For 802.1X To An Ex Series Switch - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

CHAPTER 88
Examples: Access Control Configuration

Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch

Copyright © 2010, Juniper Networks, Inc.
Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch on page 2765
Example: Configuring 802.1X Authentication Options When the RADIUS Server is
Unavailable to an EX Series Switch on page 2769
Example: Setting Up 802.1X in Conference Rooms to Provide Internet Access to
Corporate Visitors on an EX Series Switch on page 2774
Example: Configuring Static MAC Bypass of Authentication on an EX Series
Switch on page 2779
Example: Configuring MAC RADIUS Authentication on an EX Series Switch on page 2784
Example: Setting Up 802.1X for Single Supplicant or Multiple Supplicant Configurations
on an EX Series Switch on page 2788
Example: Applying a Firewall Filter to 802.1X-Authenticated Supplicants Using RADIUS
Server Attributes on an EX Series Switch on page 2794
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on page 2800
Example: Configuring VoIP on an EX Series Switch Without Including 802.1X
Authentication on page 2807
Example: Configuring VoIP on an EX Series Switch Without Including LLDP-MED
Support on page 2813
Example: Applying Firewall Filters to Multiple Supplicants on Interfaces Enabled for
802.1X or MAC RADIUS Authentication on page 2816
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
802.1X is the IEEE standard for Port-Based Network Access Control (PNAC). You use
802.1X to control network access. Only users and devices providing credentials that have
been verified against a user database are allowed access to the network. You can use a
RADIUS server as the user database for 802.1X authentication, as well as for MAC RADIUS
authentication.
2765