Show Igmp-Snooping Route; Table 348: Show Igmp-Snooping Route Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show igmp-snooping route

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 348: show igmp-snooping route Output Fields

Field Name
Table
Routing Table
VLAN
Group
Copyright © 2010, Juniper Networks, Inc.
show igmp-snooping route
<brief | detail>
<ethernet-switching <brief | detail | vlan (vlan-id | vlan-name)>>
<inet <brief | detail | vlan (vlan-id | vlan-name )>>
<vlan vlan-id | vlan-name>
Command introduced in Junos OS Release 9.1 for EX Series switches.
Option enhanced to support IPv6 multicast groups in Junos OS Release 10.2 for EX
inet
Series switches.
Display IGMP snooping route information.
none —Display general parameters.
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display Ethernet switching information.
ethernet-switching
—(Optional) Display
inet inet
3 IPv6 multicast routes, display information about the routing table, the routing next
hop, and the Layer 2 next hop.
—(Optional) Display route information for the specified VLAN.
vlan vlan-id | vlan-name
view
show igmp-snooping statistics on page 2681
show igmp-snooping vlans on page 2683
show igmp-snooping route on page 2680
show igmp-snooping route inet detail (IPv6 Multicast Route) on page 2680
show igmp-snooping route vlan v1 on page 2680
Table 348 on page 2679 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
(For internal use only. Value is always 0.)
(For internal use only. Value is always 0.)
Name of the VLAN on which IGMP snooping is enabled.
Multicast IPv4 or IPv6 group address.
Chapter 86: Operational Commands for IGMP Snooping and Multicast
information for IPv4 and IPv6 multicast groups. For Layer
show igmp-snooping route command.
2679