Is Unavailable To An Ex Series Switch - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Verification
Purpose
Action
Meaning
Related
Documentation
Example: Configuring 802.1X Authentication Options When the RADIUS Server is
Unavailable to an EX Series Switch
Copyright © 2010, Juniper Networks, Inc.
port 1812;
secret "$9$qPT3ApBSrv69rvWLVb.P5"; ## SECRET-DATA
}
}
profile profile1{
authentication-order radius;
radius {
authentication-server 10.0.0.100 10.2.14.200;
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verify That the Switch and RADIUS Server are Properly Connected on page 2769
Verify That the Switch and RADIUS Server are Properly Connected
Verify that the RADIUS server is connected to the switch on the specified port.
Ping the RADIUS server to verify the connection between the switch and the server:
user@switch> ping 10.0.0.100
PING 10.0.0.100 (10.0.0.100): 56 data bytes
64 bytes from 10.93.15.218: icmp_seq=0 ttl=64 time=9.734 ms
64 bytes from 10.93.15.218: icmp_seq=1 ttl=64 time=0.228 ms
ICMP echo request packets are sent from the switch to the target server at 10.0.0.100 to
test whether it is reachable across the IP network. ICMP echo responses are being returned
from the server, verifying that the switch and the server are connected.
Example: Setting Up 802.1X for Single Supplicant or Multiple Supplicant Configurations
on an EX Series Switch on page 2788
Example: Setting Up 802.1X in Conference Rooms to Provide Internet Access to
Corporate Visitors on an EX Series Switch on page 2774
Example: Setting Up VoIP with 802.1X and LLDP-MED on an EX Series Switch on
page 2800
Configuring 802.1X RADIUS Accounting (CLI Procedure) on page 2837
Filtering 802.1X Supplicants Using RADIUS Server Attributes on page 2838
Server fail fallback allows you to specify how 802.1X supplicants connected to the switch
are supported if the RADIUS authentication server becomes unavailable or sends an EAP
Access-Reject message.
Chapter 88: Examples: Access Control Configuration
2769