Show Pim Statistics; Table 368: Show Pim Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show pim statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
2734
®
OS for EX Series Ethernet Switches, Release 10.4
show pim statistics
<inet |inet6)>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
show pim statistics
<inet |inet6)>
<instance instance-name>
<interface interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Display Protocol Independent Multicast (PIM) statistics.
none —Display PIM statistics.
—(Optional) Display IPv4 or IPv6 PIM statistics.
inet | inet6
instance instance-name —(Optional) Display statistics for a specific routing instance
enabled by Protocol Independent Multicast (PIM).
—(Optional) Display statistics about the specified interface.
interface interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear pim statistics on page 2655
show pim statistics on page 2740
Table 368 on page 2734 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 368: show pim statistics Output Fields

Field Name
PIM statistics
PIM message type
Received
—(Optional) Perform this operation on all logical
Field Description
PIM statistics for all interfaces or for the specified interface.
Message type for which statistics are displayed.
Number of received statistics.
command.
show pim statistics
Copyright © 2010, Juniper Networks, Inc.